Additional display for vehicular balances
Complex uses as additional display for vehicular balances. Data accept across RS232 channel. In order to the appliance give the maximal light and have the permanent work without the fail off displays has been made the non multiplexed work with the temperature compensation of the maximal current through display. Power supply has been made with the small torus and switching the stabilizer in the secondary. For this has been used modified SR3 regulator. Instead of the external potentiometer for the adjusting power supplies put in the complex with the temperature probe, who decreases the voltage power supplies when the temperature exceeds 50°C. The such version has been excluded the additional regulatory complex and is avoided additional dissipation energies. Aside from this, use switching the regulator in the secondary part power supplies increase the resistance electronics on voltage impact and simplifies possibly the servicing.
characteristics:
 interpretation: fixed device, aluminic chassis with electronics for the assembly in the housing, IP20
 display: 6 digit seven segment LEDS display heights 57 (housing 70) the mm, 28..62 mcd (to 50°C), directly are operated
 color display: super bright red
 power supply: 220VAC / 15VA
 the temperature region: -30..80°C
 temperature protection: above 50°C the automatic decrease disipation of display to the maximal allowed level
 communication: RS232, 9600, 7,P,1 or 9600,8,N,1, Xon / Xoff, standard continuous data to 24byte
 type connection: optically are isolated with arrestors and supressors to ground on the entry (uses the alone reception)
 in the version V105 support next balances (5 jumpers):
1: METTLER TOLEDO IND310
2: METTLER TOLEDO 8530 Cougar
3: METTLER TOLEDO PANTHER
4: METTLER TOLEDO LYNX
5: HBM WE2108
6..31: freely
 frequencies of refreshing of data: 80Hz (without the flicker - segments are continued work)
 period refreshings of data statements: 300ms fixedly (ordered at wish from 15ms..)
 decimal point was able eliminate, manually set or take from data. In the every assumption decimal point darkens if is not behind number. Decimal point sets up with three jumpers.
 display during switch on show the set type and decimal point.
 excess communications after the 10 second indicated the make dark display and message.
 the wrong data type indicated the message after 10 seconds of successive errors.
 during includings, and when does have not inflows of data, device on dispaly prints out the version, number set balances and set up decimal points, and after this prints out 888888 because of the visual test of display.
 the watchdog complex of resets reset display in the event of the unwanted software jamming
 dimension: 410 * 52 * 80mm (l * w * h)
 weight: 1,3kg
 guarantee: 3 years (do include VN strike across the net voltage or RS232)
Price of complex on the aluminic chassis without the box: 1850 HRK (246Eur)
Possible version:
 performance with less or more number (to 24)
 other communication speed (19200, 38800,..)
 the other type balances, other data type or the connection on PC computer because of displays different numerical data
 power supply 24Vac or 24..35Vdc
 the animated display (all what wishes for was able make with segments displaya)
 display of precise time, counter impulses or period times.
Display D6 in the version with LED diodes 
Characteristics:
 electric same as well as the standard performance
 the added trimer for the regulation of maximal intensity
 the guaranteed visibility on the sunned place 100 m (beside the red filter for the improvement of contrast)
 are reduced the horizontal angle to the visibilities on 120°
 intensity to the lights 4,5 the CD (30°) / 1,5 the CD (60°) / 2,5cd (80°)
 LED diodes be situated on pin compatible modules also it is likely standard display add the simple replacement of type of indicator
Price of complex: from 2300 HTK (306Eur) depending upon the type LED of diodes
Possibly especially orders compatible LED module in exchange for Kingbright SA23-11SRWA.
|