Batching plant waters Q1
Batching plant Q1 is device is intended for dosing (warm waters similarly.). Constitutes from controlling electronics and keyboards. Controlling electronics accept impulses with sensors of flows (10 impulse along liter) and on the basis of default value control duration of involvement of output relays. Appliance has built-in indicator of temperature of medium with the two channel entry for semiconductor sensors. The first sensor is LM335, and other is five 1N4448 diodes joined in series. Device measures voltage on diodes and calculation shows temperature of diodes. Calibrates realise display temperatures to the extent that 50°C with error smaller from 1°C. All calibrations can do through keyboards with documented procedures.
Appliance has two programs: program dosing and program measurements. Program measurements make possible the measurement of released quantity and transfer to the values in program dosing. In the event of end arriving impulse from the water gauge , when doses going , the exit put out automatically after one minutes. Doses temporarily can will stop.
Device show set and remaining quantity at the same time. Last the executed dosed value will be remembered and during new includings of appliances automatically will set as the given quantity.
It concerns exceptionally quality device. Neither one appliance has had not the failure in the last 5 year from when has been made first. Price of device with keyboard without sensor of temperature: 3000 HRK (400eura).
If want, can order and complete batching plant of warm water which has:
housing with the connecting warm and cold waters
thermostatic regulator temperatures
batching plant Q1 with keyboard
sensor which display temperature of warm water
probe for measurement temperatures (pastes similarly.)
main switch electricity
Range: 0.1.. 99.9 l
Resolution: 0.1 l
Accuracy: +0 0.1l
Maximal flow: 0.35 l per minute limited water gauge
Range of thermometer: -40.. 100°C
Error of thermometer: 5°C (typically 1°C)
Resolution of thermometer: 0.1°C
Sensor of thermometer: LM335, 5 * 1N4448
Power supply: 220VAC, 5VA
Contact of relays: 5A / 250VAC
The built-in fuse: power supplies 315mA, output 1A
Housing: ABS 96x96x130mm
Keyboards: 16 tastera IP65 industrial
The suitable water gauge: IKOM standard water gauge with the built-in optointerrupter
Izgled kompletnog dozatora DADRA: